-
**Tell us about your setup:**
1. What iDevice are you using? Catalina
2. On what version of iOS is it? 10.15.7
3. What version of checkra1n are you using? 0.12.4
4. What is your host system (OS ve…
-
I have code that works on the hacker device but not the pvt device. Any clues why?
-
After flashing my NIS by following this guide, it wouldn't show up as a USB device. I then experimented a bit more, I figured out that instead of using ```PA11/PA12``` for USB, I had to use ```PA9/PA1…
-
The ID pin based bootloader entry scheme is highly inconvenient and requires using an illegal USB cable. Most end users will probably only need to enter the ROM bootloader once, so a test point is fin…
-
```
1.I jailbroke my iPhone 4 ios 7.1.1 using geeksn0w (semi untethered)
2.When I boot it after restore, it stated "Applekeystore : operation failed (
pid : 53 sel : 7 ret : e00002bc )
3. Now my iPho…
-
OkI21 updated
3 years ago
-
```
What steps will reproduce the problem?
1. firmware 1.1.3 was installed. I had tried Nate True's jailbreak upgrade
which did not work and I got 1.1.3 with new base band installed
2. Tried iBrickr …
-
```
What steps will reproduce the problem?
1. firmware 1.1.3 was installed. I had tried Nate True's jailbreak upgrade
which did not work and I got 1.1.3 with new base band installed
2. Tried iBrickr …
-
```
What steps will reproduce the problem?
1. firmware 1.1.3 was installed. I had tried Nate True's jailbreak upgrade
which did not work and I got 1.1.3 with new base band installed
2. Tried iBrickr …
-
```
What steps will reproduce the problem?
1. firmware 1.1.3 was installed. I had tried Nate True's jailbreak upgrade
which did not work and I got 1.1.3 with new base band installed
2. Tried iBrickr …