-
Obviously, you could say that I don't have to unplug it, but it can happens.
I got this stacktrace
```
2016-01-26 11:06:15.212 [ERROR] [.opencean.core.EnoceanByteStreamPipe] - Error while reading fro…
-
```
1. Feature Description
I'd like to use openHAB together with either USB or IP connected RF
Transceiver, like the following HW examples, but not limited to ...
http://shop.busware.de/index.php/cP…
-
```
1. e.g. Zigbee, EnOcean, Zwave, Insteon.
2. These all seem like very useful and achievable bindings to implement.
I will be looking into this myself and wonder if I might be on others radars?
Wi…
-
```
using the https://code.google.com/p/java-enocean-library/
```
Original issue reported on code.google.com by `teichsta` on 8 May 2013 at 1:24
-
```
There are Dimmers (e.G. Hager TXA213) which need a Stop-Telegram for relative
dimming. Stop is DPT 3.007 '0' or '8'.
The Advantage of Start-Stop is less Telegramms are needed, only one
Start-Te…
-
```
1. Feature Description
I'd like to use openHAB together with either USB or IP connected RF
Transceiver, like the following HW examples, but not limited to ...
http://shop.busware.de/index.php/cP…
-
```
1. e.g. Zigbee, EnOcean, Zwave, Insteon.
2. These all seem like very useful and achievable bindings to implement.
I will be looking into this myself and wonder if I might be on others radars?
Wi…
-
As far as I know there are currently two ways in openHAB to control 433 Mhz RC Power Switches with a RF transmitter connected to the GPIO Pins of a raspberryPi:
1. Exec Binding: Installing rc-switch a…
-
```
There are Dimmers (e.G. Hager TXA213) which need a Stop-Telegram for relative
dimming. Stop is DPT 3.007 '0' or '8'.
The Advantage of Start-Stop is less Telegramms are needed, only one
Start-Te…
-
```
What steps will reproduce the problem?
1. Configure serial port of your usb dongle
2. start openHAB with EnOcean binding
```
Original issue reported on code.google.com by `kai.openhab` on 12 Sep…