-
CM108 PTT functionality is not implemented - CM108 audio devices have GPIOs that can interface with PTT on radios (and are in the case of the AIOC) and is of course far more sociable and preferred to…
-
Hi Ed, please help me. I updated from old version(with VS1053 work fine) Mon, 28 Jun 2021 12:40:00 GMT to V2 Fri, 16 Jun 2023 07:30:00 GMT both version compiled with
ArduinoIDE 1.8.12 and ESP32 2.0.1…
-
When I try to use gpio readall, it return wiringPiSetup: mmap (GPIO) failed: Operation not permitted.
-
m working on a project that uses st7920 and atmega328p. Currently im trying to set up the st7920 lcd display in 8-bit parallel (8080) modifying the example code in the u8g2 library and trying to print…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello! Thank you for your work. I have read the manual but stuck with the pin setup.
In the meantime I have found some references and the config for me is now like this:
pin_enc_clk = 25
pin_enc_…
-
The F1 GPIO mapping works completely different, by "remapping" all the pins for a peripheral together.
Invent some YAML format to represent that, and extract it from the GPIO XMLs.
-
Hi,
Any chance to support /sys/class/gpio under Linux (like most SBC boards have)?
Or via some USB dongle:
http://www.zoobab.com/ch341-usb-spi-i2c-uart-isp-dongle
-
Hi,
We bought W5500 module and MT3620 EVB board and want to use ASG210-M4-Samples to evaluate it.
And we have one question here, Does MT3620 M4 **gpio_w5500_ready pin** connect to W5500 **INT pin*…
-
From caskaz:
I try to set GPIO.
I want to set value to GPIOx_MODER and GPIOx_ODR.
How does value set to memory?
There is no "L!".