-
**Describe The Problem:**
The first press of the G4 doorbell button does not activate the 'G4 Doorbell Doorbell Trigger' but subsequent pushes do activate 'G4 Doorbell Doorbell Trigger.'
**T…
-
Haviing installed pre-27, I deleted all my discovered devices and reran the discovery test,
This is the HE log for when discovery started:
> app:2982022-02-04 12:22:18.824 infoMQTT: | =====…
-
### The problem
I have a number of Xiaomi Aqara devices, some of which have repeatedly dropped off the network. Some of these effected are within 2 - 3 metres of the co-ordinator, a Conbee II connect…
rjenx updated
2 years ago
-
I have went through the great implementation walk-thru and approved the two Nest Thermostat devices from the Google API approval process. When it redirects me back to the hubitat page I never see the…
-
First - as usual thanks for the great examples in your files. I was finalizing my Hubitat Dimming Switch Driver and noted the following anomalies:
async **setDimmerTransition**: This command take…
-
## Device
- Product name: ZJSBL7-100Z
- Manufacturer: _TZE200_hkdl5fmv
- Model identifier: TS0601
- Device type :
- Switch (4 Phases with Power Metering, 100A)
## Screenshots
![ZJSBL7…
-
In my project I used a programmable radio, the CC1101. It allows for using the Somfy required 433.42 MHz frequency without changing crystals. I achieved full range successful Somfy shade communication…
-
Hoobs log shows this:
Hubitat Tonesto7 BridgeHubitat-v2WARNINGNOTICE: New version of homebridge-hubitat-tonesto7 available: 2.5.12
Cannot see any way to update to a 2.5.12 version. It is updated on…
-
Moving thru the configuration, I logged into my account:
(Oddly, did not receive the prompt from Apple for the 2FA code)
Move on to the next item, iCLOUD 3 DEVICES
Click `Submit` and receiv…
-
### The problem
I've just migrated from Hubitat to Home Assistant. I'm using Z-Wave JS with a network of 38 devices, mainly GE/Jasco switches and outlets.
I'm a software developer with plenty of e…