-
1. To reduce spacebar wobble, create slots under each stabilizer post, for the post to extend from the mount through the keyboard PCB
2. Modify stabilizer post design to optimize hole size to minim…
dfnr2 updated
3 years ago
-
I've come in this morning and Gerald is cutting sloppy.
On inspection, the laser cutter head has lots of play in it where it attaches to the X-Axis.
I had a look and couldn't see how this is tighten…
-
(Gregicality Skyblock Edition)
## **Basic Electronic Circuits** require:
**Capacitors**, which require **Polyethylene** (MV _Chemical Reactor_, MV _Distillery_), and MV _Assembling Machine_
**Cent…
-
When laser engraving, the center of the image is out of focus.
In the bidirectional movements, the **start and end points are always sharp** (left and right side), but the **center deviates** from …
-
Hi and thank you for your work and dedication to the keyboard community!
I contacted a laser cutting company to cut a Lily 58 pro case, but they replied that the files I gave them didn't have any s…
-
After watching your video I noticed that the two side plates needed some minor adjustments... beveled the edges as you suggested but around the trigger pocket area there doesn't seem to be any clearan…
-
These are way more common than I ever gave the credit for. It seems like Clippath would be a kind of svg element in it's own right. It might need some indexing within the shadow dom to process the URL…
-
Hello terjeio,
today i did some short probing tests and would like to tell you the results.
First of all I would like to suggest that you can jogging in the probing tab, would be very helpful in m…
-
The description for Small Glass Hole reads
> Allows cutting circular holes into Glass or Grating.
> Place on top of an existing glass/grating surface. (Place onto wall to rotate, then drag onto th…
-
For usage not directly connected to 3D printing (drawing, laser / vinyl cutting, etc.), a servo would be good to use as a lightweight Z axis actuator. This would enable fast movement with small but pr…