-
I've been using the `set_single_persistent_default_layer` function to switch base layers but the changes aren't persisted to EEPROM. I've also wired up a small LED strip and my understanding is that c…
ameyp updated
3 years ago
-
Light deduction system is the system which can be react to the object(human body) near it. This system can can used in several places (Entertainment, security, decorations, etc)
Tools and materials:-…
-
On slackware64-current with a USB bluetooth dongle. I have been using the trionesControl python module to control an LED strip. When running from a terminal everything runs and exits fine. But I found…
-
I tried using the test application with the default GPIO 18 (PWM0) on my Raspbery Pi 3b, running Ubuntu 21.04.
However my LED strip stays off, and this is the console output:
```bash
$ sudo ./test …
-
Hi, I would like to add led to my moonboard, but I think that my old moonboard layout is different from the ones in the images.
I would like to know if it is possible to modify the moonboard layout a…
-
К Arduino nano подключено 6 лент, я задаю цвет светодиода при помощи
```
leds1.set(currentIndex, mRGB(red, green, blue));
```
Не устанавливаются никакие цвета кроме синего.
При установке синего ц…
-
What led you to use the expensive Honeywell pressure sensor? Did you try lower cost options like https://www.digikey.co.uk/en/products/detail/omron-electronics-inc-emc-div/2SMPP-02/2504247?
I also …
-
### Is this a feature relevant to companion itself, and not a module?
- [X] I believe this to be a feature for companion, not a module
### Is there an existing issue for this?
- [X] I have searched…
-
What is the process to add more lights to led_ble?
For ex., here is the list of commands/characteristics to be used with SP110E controller.
And I would like to add commands for SP107E (it controls t…
-
Shelly Plus Plug S has four WS2812 LEDs in the outer ring.
This template for both LED Strings (each with two WS2812) on GPIO 25 (left half) and 26 Right half) works for me:
` {"NAME":"Shelly Plus Pl…