-
-
I'm experimenting with gr-lora, trying to decode messages sent by a Multitech xDot (915MHz).
So far I am able to receive PDUs but the payload is incorrect.
The example is the `peer_to_peer_exa…
-
I'm using 433 as a frequency but can't seem to change the bandwidth to anything lower than the default, any ideas?
-
Hi sir !
I solved npm problem by update it.
The sender.js is worked and receive by Arduino with Lora module.
But receiver.js can not receive Arduino's data .
The code work without any error msg.
…
-
In datasheet , CAD mode can reduce the reception power consumption.
In Master/develop , I see RadioEvents->CadDone in the Dio3 interrupt, but the pointer is not assigned.
anyone has the experie…
-
Dear Dragino developer,
we are very interesting in your project and we are testing LoRaWAN Dragino.
We have a Lora App Server and Network server online and some gateways based on Raspberry Pi3 and a…
-
It was working all good and then suddenly I got this error.
-
Hi Im facing false interrupt triggers in lora library. Im using a Arduino DIP IC at 3.3V on bread board and DRF1276F Lora module. Have attached the interrupt to pin number 2 and after some 2 hours of …
-
I'm trying to receive LoRa packets sent by my Raspberry Pi LoRa shield with RFM98W chip, but I've only managed to receive a couple of packets randomly from almost a constant stream of packets. Also, t…
-
I'm doing some experiments using gr-lora on a USRP B210 and a Libelium Waspmote with SX1272 chip as a transmitter. Actually i can decode correctly (still loosing some packets as the receiver lost the …
mgucc updated
7 years ago