-
**Board**: Raspberry Pi 3b+
**LEDs**: WS2815 (12v)
**Pin**: GPIO12 / BCM18 / PWM0
**dmaNum**: 10
**Number of pixels**: 236
Works as expected 80% of the time.
intermittently, random blocks of…
-
Hey Claude !
Thanks for the amazing job you did. I used your library for dmx with an esp8266 and now I'm using it with an esp32 to control directly 16 leds 12v with mosfets. It works like a charm ! …
-
## Investigation
We need to make sure that all components in our master design are compatible with the 3.7V provided by the LiPo. Here are the main components we will be using and their specification…
-
Hi
Great board, I'm having fun with it.
I can't see where to connect the Hotend heatsink fan. NOT the part cooling fan, that's the PWM outputs. As near as I can tell it's not a PWM fan, just an …
-
I bought some refirbushed hoverboard for cheap and it's a split board with a new chip i guess, i have a lot of those board so if you want one ill send a pair to you and ill pay for shipping, so you ca…
-
First off, I just want to say I am glad this project was picked up again. The changes already make it work much smoother (Component organization, especially the crosshairs so it isn't difficult to lin…
-
@JakubKajzer
- the amplifier gain depends on the source output impedance. did you take it into account?
- connecting outputs of two amplifiers is not a good idea.
- did you simulate the signal cha…
-
The nozzle heater suddenly stopped working; I turned the printer on one morning, and it wouldn't heat. Thermal runout error. I ordered it to heat both the bed and the nozzle and measured the voltage a…
-
Need some help to change a LVS deck to be compatible with hierarchical LVS checking.
In [testcase_deep.zip](https://github.com/user-attachments/files/16457198/testcase_deep.zip) you can find the test…
-
I tried different eproms, different 8.16kb files and just the menu and it never worked. I tried to put the eprom into another cartridge and the menu appears there at least. So does it work for anyone?