-
### SPECIFIC ISSUE ENCOUNTERED
This is a feature request:
Would also be nice to be able to have some sort of flag to checkAvailability for LOW_ACCURACY, MEDIUM_ACCURACY, HIGH_ACCURACY or FAIR, GOO…
-
I have 4 Arlo Essential Spotlight Cameras (connected directly to wifi, no base station) that randomly go offline and do not work until I reinstall the camera just as if it were a newly purchased. The…
-
**Describe the bug**
After an unknown and variable number of hours, the wakeup-on-facedetection stops working, and I have to manually wake screen.
**To Reproduce**
I can reactivate it by entering…
-
I am using an Amcredt AD410 with the Dahua integration.
Home Assistant 2023.1.7
Supervisor 2023.01.1
OS 9.5
Running as a VM on esxi, if that matters.
Starting on feb 1, i am no longer gettin…
-
Hi,
as the display is switching off after some time (of course a very good function), is it possible to add a move detection PIN to switch it ON? Idea is that instead pressing the touch screen, a sim…
-
At [a bank angle near 45 degrees](https://en.wikipedia.org/wiki/Banked_turn) the pitch and roll readings may start to roll over, making this code unsuitable for airplanes as pointed by Mr. [Eckhard](h…
ProFL updated
3 years ago
-
Hi Everyone,
I am currently trying to use compute shaders in my ARCore based App. My first attempt is basically replacing the ARCorePawn in the HelloAR Example Project with a spawner that creates a n…
-
I was wondering about far to high brightness values after starting the motion sensor sketch/device.
The root cause for it sits in motion.h
```
uint8_t status () {
brightsens.measure();
…
-
I'm trying to use OctomapPlanner following manual.
This repository does not include how, what to install exact requirements to build this repo enough yet.
Missing packages are OpenCV, PCL so far.
…
-
A battery in one of my contact sensors died. I replaced the battery but was not getting a connection to home assistant. I did a wyzesense.remove for the contact sensor and then tried reading the senso…