-
### Is your feature request related to a problem? Please describe.
The problem is when a very large battery is present and a voltage drop from bulk 55.2V to 54V float voltage happens in one go. A lot…
-
### The problem
The GoodWe integration works very well with my GE-branded GoodWe GEH inverter (model: GEH10-1U-10).
However, my inverter has four PV strings (MPPTs), and the integration only rep…
-
The list of unsupported metrics from the logs for my Delta 2, as you've asked:
- pd.icoBytes
- pd.reserved
- bms_emsStatus.bmsIsConnt
- inv.reserved
- mppt.res
-
Hello.
First I like to thank you for this custom component, I really appreciate your work!
Everything else is working fine, but like I mentioned in the title the value of the binary sensors `DEVI…
-
Here is the Logs i found.
If I understand right, the driver did not recive any MQTT Updates.
He tried to auto-restart at 09:14 which failed.
My manual restart at 09:53 succeded.
```
2023-03-2…
-
**Is your feature request related to a problem? Please describe.**
Unfortunately not every BMS shows the right amount of current drawn, even if calibrated. After calibration either high current value…
-
This is the MQTT session with disconnect and connect in the same second [2023-08-08 16:01:38]
```
[2023-08-08 16:01:32] 1/maint/userv4//1162289,4465314/fixed/254,0,0/265,0,-,-/B01213 {"v":"conn",…
-
Hello,
I was looking for a possibility to use nodered with a victron solar charger without an additional VenusOS Raspi.
Your solution would be a easy workaround, I thought.
The problem is I have …
-
I finally got this tool running now - really nice
I totally prefer to use the internal shunt, dbus-seriallbattery only to observe at cell level
What i don´t unterstand: How is SOC calculated?
I…
-
I have a lot of Devices, and Amps are formated to 1 for (almost) all devices.
This driver has 2, so reading and comparing several Devices in the HX-Console is a (little!) bit harder.
Can you forma…