-
Hello,
Your library displays GIFs perfectly on a double RGB Led matrix (128 x 32) controlled by an ESP32
But as I load a large code and many libraries (server, clock, audio spectrum, etc.), my mem…
-
When trying to control two WS2812 strips with AdaFruit_NeoPixel on two separate PWM GPIOs (Board.D13 and Board.D18) I get the following RuntimeError:
Error in atexit._run_exitfuncs:
Traceback (mos…
-
I suppose they are part of the pending update. For the measurement units I suggest either belly (though it would be too tight) or in the rear as the removal of the TF screen leaves plenty of space. An…
-
Intercept M150 command; Set RGB(W) Color. Similar to the LEDStripControl plugin, but for Neopixels.
-
Being active on the Arduino forum i have again come across people using FastLED.delay() which is causing them issues. FasdtLED.delay() calls show() repeatedly until the time has elapsed, which is **Po…
-
> - Ethernet: I think the problem is simply the 2 crossed connectors to RMII bus which I've explained above. Hopefully this is the only issue - the connector is still able to recognize when an etherne…
-
Hello,
i tested and had success with neopixels on RPI4, on your libs !!
But i changed board for a Jetson NANO, and i can't use your libs anymore !
here is the error :
```
from rpi_ws281x impor…
-
I am working to add the ability to controll the color of the neopixel strips on my printer from the LCD. I have gotten the single R, G, and B controls to work, setting the strip to full red,green,or …
-
Fairly easy, but somewhat non-obvious since there is a "built in" implementation for neopixel support here. A new example would help demonstrate how this should be done.
-
### Bug Description
In the SPI.cpp file there are a few redefinition errors being thrown as well as two others errors. This is the second compilation of Marlin I have done. The first was successful…