-
### The problem
In my log I have quite a few of "Error fetching data" errors
### What is version of Home Assistant Core has the issue?
core-2021.3.4
### What was the last working version of Home A…
-
Hello,
I try to update my shelly 2.5 from 20210311-193713/2.8.0-g1e8cd09-master to the new version but dosen't work
From command in the terminal I receive this error ./flash-shelly.py --f…
-
I reuse an old project that was compiled with Arduino core for the ESP32 release v1.0.6,
but now with release 2.0.0 ticker doesn't work anymore.
**Hardware:**
ESP32 16MB (dev board)
4 relay bo…
-
### What issue do you have? Please be as thorough and explicit as possible.
I have installed a DUALR3 installed on a roller shutter. All works well with homebridge and homekit. I just installed…
-
Hello,
after install 4 new meross devices, all Meross devices configured in Home Assistant stop working.
Yesterday I installed 4 new [meross shutter switch MRS100](https://www.amazon.it/dp/B08CTVK…
-
Hey,
I installed the Shelly 2.5 as a roller shutter, and everything works, besides the status.
When the status is set to 50, the roller shutter is actually on around 25.
I performed calibration sev…
-
**Is your feature request related to a problem? Please describe.**
Please support the Meross Smart Rolling Shutter MRS100 .
**Describe the solution you'd like**
For this Rolling Shutter devic…
-
## Expected Behavior
When setting the position of the secondary rail of a top-down/bottom-up Powerview shade, the secondary rail should move to the set position and the OpenHAB state of the secondary…
-
### The problem
I've added integration Somfy to my HA installation using the Web UI.
Created an automation to close all screens (12 in total)
trigger: sunset +00:40:00
conditions: none
10 out o…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
YES, BUT a Home Assistant developer has told me to come here
### Is your problem within ZWaveJS2MQTT?
NO, my problem…