-
Hi there, I'm using a ESP32-S3-DevKitM-1.
A flash encryption in development mode is enabled, as well as the secure boot V2. Here is the summary.
```
=== Run "summary" command ===
EFUSE_NAME (Block…
-
System: New 3ds (non-XL) Dual IPS Screen (PAL Region)
Firmware: Sys 11.16.0-49E Luma3DS v13.1.2
TWiLightMenu v27.8.0
NDS-Bootstrap v2.0.0
System SD: SanDisk 256 gb Ultra Plus formatted to Fat32, c…
-
### Issue type
Other
### Device
Poco F2 Pro (lmi)
### crDroid version
crDroid 10
### Exact version / Build date
10.6/ 2024-07-26
### Bug description
While using device, syst…
-
Hello,
with IDF Branch/Release 4.0 "Bluetooth" and "SoftAP" are not working in coexistence.
I have written an Android App, which uses the both networks WiFi (Udp Client) and Bluetooth (BDR Spp…
-
esp-mdf WiFi mesh 组网发现,连接路由器组网连接成功后,直接断掉所连接路由器电源,会大概率出现cache error错误无限重启,小概率出现无法重连到路由器但是mesh组网正常,就是一直连接不上路由器,经测试路由器必须断掉电源bug才会复现,重启和其他操作不会复现bug,附件图片和文档为MDF与IDF版本与出现错误的串口信息
-
Hello all,
I am trying use Nuttx in ESP32C6-devkitm.
I followed the tutorial: https://nuttx.apache.org/docs/latest/platforms/risc-v/esp32c6/index.html
Below you can se my outputs:
`~/nuttxspace…
-
**Describe the bug**
A clear and concise description of what the bug is.
When compiling on Linux I get the following error about `_close`, `_getpid`, `_kill`, `_lseek`, `_read`, and `_write` not b…
-
**Describe the bug**
I was trying to compile yolov5_s into .blob format, which I succeeded, see log example:
```bash
$MYRIAD_COMPILE -m yolov5s_opt.xml -ip U8 -VPU_NUMBER_OF_SHAVES 4 -VPU_NUMBER_…
-
I've implemented a bootloader for the Pico W allowing code upload via WiFi: [picowota](https://github.com/usedbytes/picowota); unfortunately this means having a copy of the WiFi firmware in the bootlo…
-
**Describe the bug**
Bazecor-1.3.9 hangs on reflashing Neuron of Dygma Defy from `v0.0.6` to `v1.2.5-beta`.
**To Reproduce**
Steps to reproduce the behavior:
1. On Linux launch Bazecor-1.3.9-x64…