-
### Describe the bug
The **250GB WD PC SN530** NVMe is not detected with an Geekworm X1001 Adapter on my 8GB Pi 5.
Tested with dtparam=pciex1_gen=2 and 3.
With a different 500GB NVMe **Sandisk S…
-
manual update to signalk-server-node 1.1.1 seems to be working (nodejs 8.x needed):
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt install nodejs
cd /home/pi/.config
rm …
-
```
What is the expected output? What do you see instead?
In configuration Player 2 joystick and buttons are not recognized.
What version of the product are you using? On what operating system?
I'm …
-
Hallo
Würde mich für den Equiva Smart Türschlossantrieb interessieren, da dieser im Vergleich zum Nuki sehr günstig ist!
https://www.amazon.de/Eqiva-Bluetooth-S ... B01GVZ771W
Leider gibt es be…
-
Hi all,
New here but recently set up a pijuice on a pi zero w that was successfully working initially and set up some alarms using python via I2C Command API as per the software document. It is a …
-
I put the same sd card (running debian 8 jessie, kernel 4.1.19) from the raspberry pi 2 with usb wifi (EDIMAX EW-7811UN Wireless USB Adapter, 150 Mbit/s, IEEE802.11b/g/n) into the new raspberry pi 3 u…
-
Bei der Einrichtung des wakeword und des sepia-client auf dem RPi4 mit einem Respeaker4 Mic habe ich leider folgende Schwierigkeiten:
---
Prolog
Prolog zu unserem Austausch gestern - was ich …
-
I had the same issue others had with missing requirements. I had to install the Cairo package and remove all mention of the Jetson board. This allowed the ./run.sh to run and pull all the data request…
-
Got my first Ultra 2 board a week or so ago and assembled.
Device shows up with "arecord -L" list and mixer controls work. But when I attempt to record or play, no data goes in or out.
The ultra…
-
I was looking at the dietpi source code and found some things that peaked my interest.
Firstly, a Cron job runs every single day, which downloads apt updates and fetches the MoTD shell script from …