-
On a system with only 2 Satelite pipes connected (Alloy01 and Alloy02) multiple show up when I select which to use in a crafting manager pipe.
![image](https://user-images.githubusercontent.com/69…
-
Switch the Debug Interface to use 2 general IO Pins and implement a
9600 baud Soft Uart
-
Thanks for all the hard work on this one. I've got some time to try and get this going, but am struggling with how to connect up my MAX485 using the existing code - I'm not sure where to connect the a…
-
I have a USB RS485 adapter connected to a Pi4 and I have Infinitude running in Docker.
https://www.amazon.com/gp/product/B00NKAJGZM
I'm on a higher firmware than is supported for the Proxy config, b…
-
if i only read a register once i don't get any issue but when i try to read for a second time i get the error.
this is my current test code:
```cs
static void Main(string[] args){
Co…
-
I wonder, if it could be a cli option to use Modbus RTU over TCP.
Sure the readme has an example for socat, but it would be more handy if this
would not be needed on the modbus-cli side.
I would…
-
This is a place to make notes on the steps we would need to take to modularize SensESP to allow SignalK to be but one of many protocols SensESP speaks, and for Websockets to be but one of many communi…
-
I'm having problem trying to read/write to device while using the speed 76800 with the port dev/ttySC0.
I receive data, but always wrong frame. (No header frame 0x55)
Is there a way to configur…
-
I am trying to use ISOAgLib on custom CM4 based board (with CAN, RS232 and external Flash memory) with Linux system.
My isoaglib_project_config.h
`
#ifndef INCLUDED_FROM_ISOAGLIB_CONFIG
#error Do…
-
I'm working on a new interface library for the OpenMV Cam and I thought these would be nice to haves:
* Add support to the SPI bus to share MISO/MOSI. This feature is supported by the STM32 hardwar…