-
### Describe the problem you are having
I'm using Scrypted as the main "Receiver" of the camera stream, and rebroadcast it to be used by Frigate go2rtc setup, to save bandwidth from the cameras. Howe…
-
**Description**'
Please ensure that the markdown structure is maintained.
Currently, the rtc2rtmp function is being used, but during actual testing, there is a consistent issue of stuttering in rtm…
-
We may need to make a very important change in our structure. Previously, SRT and GB were converted to RTMP and then to RTC, but they should have the ability to convert directly.
Since SRT, GB, and…
-
**Description**
srs is configured with webrtc, webrtc to rtmp, hls. When using webrtc for streaming, it generates dozens of ts files per second.
> Please describe the issue you are facing.
1. SRS V…
-
### Describe the problem you are having
0.11.1 was working fine.
After upgrading to 0.12 beta 7, I'm having issues with the web interface becoming unresponsive.
The navigation menu is there, but …
-
**Description**'
Please ensure that the markdown structure is maintained.
Using webRTC for streaming and recording videos, there is a green stripe at the bottom. However, when using RTMP for stream…
-
**Description**'
Please ensure that the markdown structure is maintained.
> Please describe the issue you encountered here.
'
Make sure to maintain the markdown structure.
After using ffmpeg to p…
-
### Describe the problem you are having
When bringing up Frigate, I'm seeing the error output that I shared below in the `Relevant log output section`.
I'm not positive that this is a Frigate iss…
-
**Description**'
Please ensure that you maintain the markdown structure.
> Please describe the issue you encountered here.
'
Make sure to maintain the markdown structure.
rtmp push stream disconn…
-
**Description**'
Please ensure that the markdown structure is maintained.
Push streaming address (part of IP address replaced with `*`):'
Please ensure that the markdown structure is maintained.
r…