-
```
What steps will reproduce the problem?
1. On Arduino 1.0.1, open the Library_Client example the is distributed with
the package.
2. Configure the service provider GPRS details.
3. Upload the sket…
-
```
1. On Arduino 1.0.4, open the Library_Client example the is distributed with
the package.
2. Configure the service provider GPRS details.
3. Upload the sketch to Arduino Duemilanove and watch the…
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino
2.
3.
What is the expected output? What do you see instead?
I was expecting the equivalent of
AT+CMGL="ALL"
But in the l…
-
```
What steps will reproduce the problem?
1. Connect to GSM Shield with SIM900 via SoftwareSerial
2. Call sms.GetSMS (or sms.IsSMSPresent)
3. Nothing happens.
What is the expected output? What do yo…
-
```
What steps will reproduce the problem?
1. On Arduino 1.0.1, open the Library_Client example the is distributed with
the package.
2. Configure the service provider GPRS details.
3. Upload the sket…
-
```
What steps will reproduce the problem?
I'm using a SIM900 on a Seeedstudio Modem.
To send data via CIPSEND, a ctrl+z is needed finally.
NOT working: gsm.SimpleWriteln((char)26);
Working: Ser…
-
```
What steps will reproduce the problem?
1. On Arduino 1.0.1, open the Library_Client example the is distributed with
the package.
2. Configure the service provider GPRS details.
3. Upload the sket…
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino and change the phone number together with the
country code
2. Change the TxRx pins on my shield to pin 2&3 which stated in…
-
```
Hello guys.
I've been working on an interfacing system of GSM Shield SM5100-B with Arduino
UNO Rev 3. and a keypad and an LCD.
when I used the example to send an SMS from the Arduino staticall…
-
```
What steps will reproduce the problem?
1. plug in ext psu
2. download gprslibrary_sms example
3. run serial monitor
What is the expected output? What do you see instead?
expect to see sms sent
…