-
Running openHPI targeting x440 RSA firmware VIET53A,
Released 01/08/04 Revision 17, snmpv1, net-snmp-5.0.9
1. When accessing SEL entries from openHPI, it fails
with errstat == NO_SUCH_NAME.
2. When a…
-
I've run into devices returning a 0 length ip addresses, mainly Lexmark printers (for example Lexmark CX310dn)
[This line](https://github.com/soniah/gosnmp/blob/master/helper.go#L108) returns the fol…
-
This issue has been migrated from Redmine: https://dev.icinga.com/issues/565
**Created by trish on 2010-07-02 11:26:19 +00:00**
Assignee: _mflacke_
Status: _Closed_ (closed on _2010-10-07 16:55:07 …
-
Running openHPI targeting x440 RSA firmware VIET53A,
Released 01/08/04 Revision 17, snmpv1, net-snmp-5.0.9
1. When accessing SEL entries from openHPI, it fails
with errstat == NO_SUCH_NAME.
2. When a…
-
I have an old device that only supports snmp version 1, in my configuration I have several devices that I am pulling metrics from with version 2 however my version 1 device is not responding, I have t…
ghost updated
8 years ago
-
In 0.5.1 release have such errors for several devices:
```
INFO[2016-10-26 12:34:07] beggining Influx Emmiter thread: 5577006791947779410
INFO[2016-10-26 12:34:07] Server is running on localhost:809…
-
When running the HPI conformance test under the Blade
center, we get an error from the
saHpiControlStateGet_Set_T1.test
"Does not conform to expected behavior
cannot set the specified control state!
…
-
windows 8.1 - snmpget from net.smnp project
I didn't succeed to run the example from the readme.md
```
agent.request({ oid: '.1.3.6.1.2.1.1.5', handler: function (prq) {
var nodename = …
-
When running the HPI conformance test under the Blade
center, we get an error from the
saHpiControlStateGet_Set_T1.test
"Does not conform to expected behavior
cannot set the specified control state!
…
-
When running the HPI conformance test under the Blade
center, we get an error from the
saHpiControlStateGet_Set_T1.test
"Does not conform to expected behavior
cannot set the specified control state!
…