-
not sure if this is the right place to put this . i have a system with battery storage and i am able to turn the charging on and off from my mobile phone app and i do that in winter ... i think it wo…
-
I have an east-west setup where two strings (with separate MPPT) share one inverter. I have setup two locations in the app (because of the different azimuth), but the maximum power of my inverter is f…
-
Esp8266
Display
All-De
2 Inverter (Hm)
Seit einiger Zeit erreiche in die Webseite ( immer nur per IPhone probiert) nur noch über über die IP-Adresse, nicht mehr die Adresse http://solar.local
V…
-
Good morning, I did all the steps correctly, I put the intelbras folder in the custom components, I set the password, everything was fine, and I can't see anything, I looked in the log file and didn't…
-
Calling the TLX Detail API with the following command results in a restricted ouput.
Call:
`api.tlx_data(device_sn, date=dayToProcess)`
The values of the key "invPacData" results always with a star…
-
Just linked our 2022 Leaf N-Connect and works perfectly.
THANK YOU very much for this excellent tool.
One annoyance with the LEAF is being unable to set 80-85% charge stop to protect the battery…
-
### Describe the issue
unable to Limit the power fed to the grid in homeassistant
### Describe your Huawei Solar Setup
Inverter Type: 5ktl-m1 and 15ktl-m2
Inverter Firmware version: V100R001C00SPC…
-
# What happened?
My Inverter MIC2000 is running. The green leaf is lighted and i see the power etc. in de Display. But there are no values on the GroStick. every value is 0 and the status is 0 (Waiti…
-
Hi all,
I saw that Ecoflow recently published their new smart inverter: PowerStream.
Does anyone know if this can be supported as well and if you can eg. Control the electrical feedback power to the …
-
> This was so timely. I have 2 PW+ and just set up the dashboard last night. Originally I noticed that only one PW was supported and then magically support for additional PW appeared by the time I got…