-
Before reporting a bug, make sure your configuration is correct and your LAN is working.
https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
Do not ask for setup help: set…
-
### Describe the bug
Since new release 17.0.0 full 11.1 kW is drawn even if the surplus (Überschuss) is much less.
The battery can't compensate. Result is that energy is taken from the grid.
![…
-
Hi all,
I installed all requirements, but I still get the following error:
_openhabian@rpizero:~/shared/solaredge_meterproxy $ python3 semp-rtu.py
Traceback (most recent call last):
File "/h…
-
Hi there,
just one short question:
as far as I got, the sensor ac_energy_kwh should show the 'lifetime energy' reported from the Inverter.
For my Installation, it has the current value of: 9.31…
-
When I download the integration from HACS all is well. but when i add it to my integrations I get:
"Config-flow kon niet geladen worden: {"message":"Invalid handler specified"}"
![image](https://u…
-
### The problem
I have a Waxman Zigbee water valve that is showing a "Water Valve Checkin event was fired" every few seconds non-stop. Others have similar problem with other devices. In my network th…
-
**Describe the bug**
Hi,
i installed the integration by HACS (latest Version) and tried to configure the integration. I always running into the following issue.
1.) Select integration
![grafik…
-
While rebooting Home Assistant Core the integration is reloading (initialising) normally. While Home assistant is loading the rest of the integrations the entities stays available until everything is …
-
Hi. I installed integration , enable modbus and port in my inverter and then start configuration in HA.... add IP and port and no read data. Show me entities but without data,..... In logs i have this…
-
### The problem
My SolarEdge integration suddenly stopped reporting a number of values, it lists them as "unavailable", while most others still work. I dug into my logs and came across this message:
…