-
The GitHub project didn't have a Discussion board, so let me misuse this issue for a success report and compliments.
I set up lprint on a Proxmox container. Snap wouldn't readily function because o…
-
# The issue
I got a Brother HL-L2300D LaserJet printer and hooked it into a RaspberryPI 2B running Raspbian (Bullseye) 32bit on it. I installed CUPS with `printer-diver-brlaser` as well as `ghostsc…
-
can't compile because of the line in the source code:
`SoftwareSerial ch375swSer(CH375_RX, CH375_TX, false, 32);`
> printserver:47:56: error: no matching function for call to 'SoftwareSerial::So…
-
Hello,
Thanks again for Labelle! It is working well on this device with the 12mm tape, but with 6mm tape, the text prints too far down and cuts off the bottom edge.
I am not entirely sure how t…
-
I have been able to successfully get my cutter to cut designs. However, it always stops before the design is finished. It cuts something like 90% of the design and then stops dead. There is no error m…
-
We've been given a colour A3 laser-printer by Open Culture, so we should bring it into use properly.
It works over USB if you print from the "bypass tray", but needs a few extra jobs before it's fu…
-
hi,
I have a usb DVB S2 tuner, and I want to exposed to ubuntu to install the drivers, how can we access directly to usb port from ubuntu like we do in vmware for eg.
thx
-
I keep getting dropouts on one of my MKS Pi units (I have two of them). At first, I thought it was a cooling issue, so I installed fans, then I thought it was a voltage issue because I was running off…
-
Hey, I want to know if the package can be used for windows app.
-
Hi there,
tried to get the DCP-8065DN working on my RPi. I chose the driver for DCP-7065DN and it seems to be working. I successfully printed from an iPhone using AirPrint and from Libreoffice on U…