-
As discussed on IRC (I may have misinterpreted things or got something wrong):
There needs to be a standard power/control interface for active probes (that lives separately from what carries the ac…
-
Hello. I would like to use this project on my KVM which is almost older than me and has only PS2 port. But i would also like to keep my RKM working, which has ps2 output.
Can you please make option…
-
### Describe the bug
I have flash latest snapshot to my Rock64 SBC.
SD: working as expected
EMMC: not working
I attached log below:
```
U-Boot 2024.07-OpenWrt-r27300-e7ea93e1e3 (Sep 05 2024 - …
-
Would it be feasible to add support for the Teensy 3.1/3.2 boards?
Teensy 3 is an Arduino compatible development board. Arduino cor
ARM Cortex-M4, 72 MHz standard, 96 MHz overclocked
64kB RAM
256kB …
-
When I hookup a sc16is752 device to the USB bridge, none of the reads work on that slave device.
It should have been a single transaction (CS asserted) with a write command that selects the register/…
-
## Environment
- Development Kit: ESP32-DevKitC
- Kit version: v4
- Module or chip used: ESP32-WROOM-32D
- IDF version: v4.2-dev-1905-g625bd5eb1
- Build System: idf.py
- Compile…
-
Only raise issues for problems with the library and/or provided examples. Post questions, comments and useful tips etc in the "Discussions" section.
To minimise effort to resolve issues the followi…
-
Hi, I just tried to connect, and the switch seemingly recognizes a new controller, but as soon as I try to send a command, connection is lost:
[14:32:53] joycontrol.device set_name::69 INFO - setti…
-
I recently got a pi 5, with AI kit - hoping to use the kit with it to create an AI powered robot. However the motor controller board won’t work. It doesn’t even power up? No lights at all on top (it d…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
zapta updated
6 months ago