-
```
What is the expected output? What do you see instead?
I would expect to see voltages, temperatures and fan speed (as your app shows)
but sensors only showing Fan Control
What version of the pr…
-
```
What is the expected output? What do you see instead?
I would expect to see voltages, temperatures and fan speed (as your app shows)
but sensors only showing Fan Control
What version of the pr…
-
```
What is the expected output? What do you see instead?
I would expect to see voltages, temperatures and fan speed (as your app shows)
but sensors only showing Fan Control
What version of the pr…
-
* Able to turn off power to different sections of the pod
-
I probably get around 15% less power near LVC compared to fully charged battery due to voltage drop.
The idea is to gradually (and optionally) increase Keep Current (%) by x % as the battery voltag…
-
Following are the output on log:-
````0
amixer: Unable to find simple control 'DC Mode Enable',0
1709919772.617362 WARNING measure-activity: Problem with amixer set "DC Mode Enable" mute amixer: Un…
-
I am unable to connect to STM32F767ZG
```
Open On-Chip Debugger 0.12.0-00017-gb153daa14 (2023-02-03-14:58) [https://github.com/STMicroelectronics/OpenOCD]
Licensed under GNU GPL v2
For bug repo…
-
Hi again,
It looks like a recent FW update to the Enyaq has causes various changes to the data. For example, the HV Current changed as below:
OLD:
```
1662389810.759750;1;17FC007B;1;8;8;1;0;0;…
-
Hi, I am using esp8266 for communication with the Voltronic Axpert VMIII Twin 6 Kw. I can't get the complete data in ESPhome .. The wiring is done correctly, i tried various yaml codes including: main…
eruc updated
5 months ago
-
Is there any possibility to perfom continuous polling and sending to MQTT?
By continuous polling I'm referring the phone app working mode.
The BLE setup is extremely slow and prone to error (someti…