-
Hello,
I've been using several sections of this library without any problem, but I just wanted to try the Curve25519 part by going through the TestCurve25519.ino.
However, it seems to fail in ev…
-
Greetings,
So I've been doing some experimenting with using the CCS811 with a deep sleep functionality and have been getting some odd results. Perhaps someone also has some experience and can help…
-
The attached simple flow, with an inject node driving a DS18B20 node and on to a function node and MQTT Out, works correctly. The Wemos D1 Mini has a DS18B20 connected in the normal manner, 0V, 3,3V a…
-
Run vanilla script on 6 lixie and 10 lixie arrays with the same results on two different nodemcus: all but two functions work great... prog_bar() and rainbow_count();
1. prog_bar();
- always cra…
-
Hi all!
I'm not sure whether is an issue, but I'm using the library together with a modem sleep. Basically the code runs for 4.5 minutes in modem sleep and then it connects to the wifi and transmit…
-
Hi,
sorry I'm new to Arduino and programming. Compiliong the sketch in "Pixel mode" everything goes fine but when compiling in "Serial mode" I've got this:
Arduino:1.8.8 (Windows Store 1.8.19.0) (…
-
Several cases:
- https://forums.adafruit.com/viewtopic.php?f=47&t=165405
- https://forums.adafruit.com/viewtopic.php?f=47&t=163320
- https://forums.adafruit.com/viewtopic.php?f=19&t=162264
wit…
-
Hi, and thanks for this component!
I've just started using it with a thehognl OpenTherm shield + Wemos D1 Mini32 board (ESP32) + Viessmann Vitodens 100-W boiler.
When ESP starts things work alrigh…
-
Hey, any updates on this? I'm getting an `_wait_for_handshake: failed` unfortunately, too. Please look at this:
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://gith…
-
Hello, I bought I2C SSD1106 which is working with other codes but when I upload that code with configuring A_config the display behaves dumb and It refreshes every 10 seconds.
here are my circuits:…