-
One cool feature could be : use groups to fully manage a group of android devices in a row (and not only one by one). e.g. same wifi configuration for a whole group of devices. Should be very useful (…
-
Dear,
Following my previous message https://gist.github.com/phha/f9a17811b2256a28d9a00b11680b3b5d, I upload the firmware in my nodemcu v2 but have to adapt this :
Comment out in optolink.h RX2 a…
-
Every time the uptime sensor updates (60 seconds), a line is logged to the logbook. If you have a lot of smartplugs, its a lot of entries!
-
### The problem
I have a couple of wemos d1 r2 where I started by installing a custom yaml, and after multiple code adjustments attempting to get them connected to wifi first, and setting a fallout A…
-
### Board
ESP32-C3 Dev Module
### Device Description
ESP-c3-12f 2MB Flash from AI thinker - based on esp32-c3
### Hardware Configuration
N/A
### Version
v2.0.2
### IDE Name
Platformio
### …
-
With the Spark Core being WiFi enabled, it makes sense to leverage this to get Wireless brewpi.
- setup wifi credentials.
- via Serial: the Web UI will accept the WiFI details and send these to the…
-
Currently, ota-server uses whatever is stored in FlashROM configuration, so if for example if WiFi interfaces are disabled, there won't be any OTA. So, it *optionally* should have own settings, and us…
-
**Describe the problem you have/What new integration you would like**
When editing configuration within ESPHome and installing via web, it quite often happens that uploader reports there is no …
-
In 1.5.5 release notes, I saw:
> Tiles will now persist and show up when there is no internet connection
So I started stumbler at my home while being on wifi, and scrolled through my entire city in …
-
### The problem
Running 2024.5.0 on Windows 11 using Python 3.12 throws exceptions during log output.
Looks like an issue with `colorama\ansitowin32.py` and logging `print(f"[{time_.hour:02}:{time…