-
I'm trying to use an SSD1306 on a Raspberry Pi 3B+ with Python3.
I think I've installed all the dependencies.
When I run `python3 sys_info.py` I get this info on the terminal:
```
Version: lu…
-
I found very weird issue/behaviour. When LED pin is changed to "12", both pins GPIO 12 and GPIO 18 are outputting the same signal. Looks like they are somehow "tied" together. Same behaviour occurs wh…
-
I'm having problems install pyaudio. I had similar problems installing SciPy.... is this Python3 compatible?
-
When attempting to control an individual neopixel's White component using:
```pixels.fill((0,0,0,255))```
the White pixel didn't light up. However, using:
```pixels.fill((1,0,0,255))```
di…
-
I'm driving a Neopixel strip successfully with a Raspi 1B (512MB RAM) Raspbian Stretch without GUI using the python control scripts.
Things work fine but long uptime the Pi (between a few hours an…
-
Any possibility for RGBW with sk6812??
-
Build fails when executing lin 87 of SConscript: https://github.com/jgarff/rpi_ws281x/blob/60e7fc4d90640ecf875bd555d44d5381ec6843c1/SConscript#L87
```
scons: Reading SConscript files ...
File "…
-
### Issue description
Seeing an `AssertionError` when running a command using `sudo pipenv run` within a `systemd` service unit on a Raspberry Pi Zero W. I have the same setup with a few other RPi …
-
Why am I getting an `undefined` error when I try to build my project?
**Command Line:**
```
GOARM=6 GOARCH=arm GOOS=linux go build
```
**Error:**
```
# github.com/rpi-ws281x/rpi-ws281x-go
…
-
Today I upgraded to alpha3 and noticed that after pressing the green "stop" button in the remote section it comes back green (running) again and the "disable" gets reverted right after that.
The log …