-
My apologies in advance as this may not be a very good bug report. I've spent a lot of time trying to get the proxy to work reliably, but I'm still not clear what it going wrong.
I'm running LEDE 1…
-
Hi all,
I have successfully installed the microSD bootloader. Then I copied the contents of firmware_mod folder to root of micro SD card and edited the wpa_supplicant.conf file.
My file is exact…
-
Ampoule IKEA : fait (Eteindre l ampoule 15s et l allumer)
Ampoule Hue : fait (Eteindre l ampoule 15s et l allumer)
Profalux Volet: 0000-0010 : Lieux - Premiers tests fonctionnent. (Voir docs Profalu…
-
I'm using Lede (currently on a Xiaomi Mi Wifi 3G). Previously was using asuswrt-merlin with entware and very happy with it (both Huawei WS880 routers are still running that).
Was disappointed with …
-
*neheb:*
Supply the following if possible:
- Device problem occurs on - GnuBee Personal Cloud One
- Software versions of LEDE release, packages, etc. - latest trunk
- Steps to reproduce - Run t…
-
*neheb:*
Supply the following if possible:
- Device problem occurs on - GnuBee Personal Cloud One
- Software versions of LEDE release, packages, etc. - latest trunk
- Steps to reproduce - Run t…
-
I've got a `lumi.ctrl_neutral2` switch (end device) which cannot be reached from deCONZ, even though it's active on the network. The switch seems stuck in a loop, where it requests the attributes of …
-
Hello @Koenkk ,
Sorry of late I get the following error spat out once it connected to my broker
```
2018-5-25 18:56:40 INFO Connecting to MQTT server at mqtt://192.168.0.30
2018-5-25 18:56:40 …
-
Hi there,
First off, thanks for creating this project. Next, if there is anything I can do to assist or troubleshoot on my end (logs, settings, etc), let me know, I'll be happy to do everything I …
ghost updated
6 years ago
-
Hi all,
I know this sensor should be supported as discussed, but I can't seem to get this sensor to join properly. I've tried the mentioned 'rain dance' tactics, like keep pressing the button while n…