-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
重启之后报错
VM Autostart disabled due to vfio-bind error
-
The SD card is not recognized in GalliumOS 3.
ghost updated
4 years ago
-
_From @sethladd on March 21, 2013 02:50:11_
I have a local pub server. I get this error when I try to publish:
pub -v lish --server=http://localhost:8086
FINE: Showing confirm message: Package has …
-
I was trying out DOSIDLE but found that it didn't work because I had cputype=pentium_mmx.
Here's the results of testing all the cputypes to see which worked and which didn't:
Installs ok:
auto
…
-
Distro: Xubuntu 19.04
Graphics: Intel UHD 620 (ASUS Zenbook UX330UAR)
After following the Guide Passthrough, adding the following to my kernel flags
`iommu=pt intel_iommu=on vfio-pci.ids=8086:59…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…
-
```
In BlueIirs 3 software NVR, RTSP stream from Spydroid 9.1 stops and starts
every few seconds.
Only settings that works is "RTSP H.264/MJPEG/MPEG4" with http 8080 and rtsp
8086 and option Use RT…