-
Hi, I switched from 88XXau to 8814au, for TP-link Archer T9UH;
previously I was able to turn off the led by using `rtw_led_ctrl=0` now instead this option is no longer available, or at least I don't …
-
*bjonglez:*
On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.
This is caused by a stupid check that refuses filename longer than 64 chars in t…
-
*bjonglez:*
On a TP-Link TL-WR841N v11, flashing LEDE from the web interface of the stock firmware is not possible.
This is caused by a stupid check that refuses filename longer than 64 chars in t…
-
Hello,
I am trying to do a test run using this code:
`snakemake -d .test/ecoli --cores 1 --use-conda`
However, the environment creation for cov_filter is failing with the error: "Could not cr…
-
We wasted some ARCHER time with a channel simulation that defined the `` XML element for the inlet but not for the outlet. In this scenario, RBCs are not removed when they reach the end of the computa…
-
oXs is not working with new FrSky Archer (2.1.2). But it makes also troubles with other FrSky RX. The delay (400us) is missing befor data sending.
OCR1A should not be set at beginn of RECEIVE state. …
-
Now both as a druid / rogue I used to go north and cap the bunkers in AV.
As a druid I stealthed in / wall jumped. As rogue I shadowstepped.
However on the test today I tried this, but there were t…
-
Package: brlaser
https://github.com/pdewacht/brlaser
Driver for (some) Brother laser printers
Most Brother printers support a standard printer language such as PCL or PostScript, but not all do…
-
# Feature request
**Short description**
You should be able to set a class-limit for multiple classes.
Say, I sell a better healer-class for ingame cash than the default one. I don't want TWO hea…
-
Hi,
I have a X20s on FW1.4.9 with Archer R4 and openXsensor.
With my fisrt model it works perfectly fine, and same configuration on another model and I have plenty sensor lost alarms on diverse se…