-
Exception 3: LoadStoreError: Processor internal physical address or data error during load or store
PC: 0x4000bf64
EXCVADDR: 0x40256ca9
Decoding stack results
0x402074d5: WebSocketsClient::loop(…
-
I have tried to migrate the code from the arduino Uno to the chipKIT Uno 32 card, but does not work because the method SerialEvent is not implemented in MPIDE core (hardware/pic32/cores/pic32/Hardware…
-
Using a ESP32 Dev Module.
If I uncomment `#define DEBUG` to enable debug I get this:
```
In file included from C:\Users\Jordy\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.6/tools/sdk…
-
Why is `abs` defined in the Arduino.h for this core?
https://github.com/arduino/ArduinoCore-mbed/blob/682a054fb9769066571ab046b200b2a30b18c11a/cores/arduino/Arduino.h#L70
This conflicts with `st…
-
Consider the following code:
```
#include
void setup() {
Debug.begin( 19200 );
}
void loop() {
Debug.println("knock knock");
delay(1000);
}
```
It fails compiling with:
```
Ard…
-
I am experiencing an accuracy problem with all of the MegaTinyCore devices I have tested (ATtiny 402, 1614, 1616, 414, 32xx
). This appears to be a core issue, as the same sketch and hardware works p…
-
In file included from ShowerWithFriends.ino:1:
/Users/george/Documents/Arduino/libraries/Sha/sha1.h:26: error: conflicting return type specified for 'virtual void Sha1Class::write(uint8_t)'
/Applicati…
-
got some progress to port to LA915. I rebuilt the AU915 files.
Start
Setting TX Config: modem=MODEM_LORA, power=30, fdev=0, bandwidth=0, datarate=10, coderate=1 preambleLen=8, fixLen=0, crcOn=1, fre…
-
Hey there...
I was trying to see if things "just work" and am having some issues...
I took my Core2ez library and replaced occurrences of `M5Core.h` with `ESP32-Chimera-Core.h`. That gave compil…
-
AttachInterrupt() is not in the supported list, but pin interrupt is supported by the chip itself.
Is it possible to add it?