-
```
If communicating with Mach3 CNC software (ower USB) and write to multiple
Analog Outputs reg. then can't get answer from modbus library.
Mach3 sends hex: 01 10 00 00 00 05 0A 00 00 00 00 00 00 0…
-
```
To reproduce the problem..
0. Using SIM900 breakout board with Arduino Micro
1. open GSM_GPRSLibrary_Client example
2. comment out the section in the loop
3. httpGET() returns bytes read, with an …
-
```
If communicating with Mach3 CNC software (ower USB) and write to multiple
Analog Outputs reg. then can't get answer from modbus library.
Mach3 sends hex: 01 10 00 00 00 05 0A 00 00 00 00 00 00 0…
-
```
If communicating with Mach3 CNC software (ower USB) and write to multiple
Analog Outputs reg. then can't get answer from modbus library.
Mach3 sends hex: 01 10 00 00 00 05 0A 00 00 00 00 00 00 0…
-
Any support for the [Sipeed Maix Amigo](https://www.seeedstudio.com/Sipeed-Maix-Amigo-p-4689.html) board?
-
### Description
- Research the necessary parts and find suitable vendors including their prices
- Check which tools are required and if they are available at GG
- Add all info to a spreadsheet in [thi…
-
```
What steps will reproduce the problem?
1. download arduino-tiny-0100-0017.zip and configure attiny85 boards
2. flash optiboot_attiny85.hex bootloader via arduino
3. try to use timer1 (delay/micros…
-
```
What steps will reproduce the problem?
1. download arduino-tiny-0100-0017.zip and configure attiny85 boards
2. flash optiboot_attiny85.hex bootloader via arduino
3. try to use timer1 (delay/micros…
-
```
What steps will reproduce the problem?
1. download arduino-tiny-0100-0017.zip and configure attiny85 boards
2. flash optiboot_attiny85.hex bootloader via arduino
3. try to use timer1 (delay/micros…
-
```
What steps will reproduce the problem?
1. download arduino-tiny-0100-0017.zip and configure attiny85 boards
2. flash optiboot_attiny85.hex bootloader via arduino
3. try to use timer1 (delay/micros…