-
Hi b3nn,
using the same avr studio version i'm getting the following error while Building. I've Checked the Makefile for mismatched Path's but all seem to be ok. Can you confirm that the current Code…
-
Add LoRa protocol to connect sensors over long distances and send data if no wifi network is available.
-
This scheme always worked:
```
#RAMSES RF
ramses_cc:
scan_interval: 3
serial_port: /dev/ttyACM0
#packet_log: packets.log
advanced_features:
send_packet: true
ramses_rf:
e…
-
It is (of course) up to you, but I would suggest combining some of the functionality of the 3 control boards you described into a single RPi Cape. If you include an Atmega/Attiny on the sensor array b…
-
I'm using a Sparkfun Pro Micro which uses a ATmega32U4 chip,
Following the code in the example for the RF receiver and transmitter, I'm successfully transmitting but the receiver is just picking all …
-
In the home-assistant.log:
```
2023-09-26 20:36:31.637 INFO (MainThread) [ramses_rf.dispatcher] RQ --- 18:070670 32:161205 --:------ 22F4 001 00 < Invalid code for 32:161205 (FAN) to Rx/Tx: 22F4
`…
-
I am using an esp32s2 mini, and I bought my card readers from both amazon and aliexpress and it seems both work with the arduino library for
[rfid](https://github.com/miguelbalboa/rfid).
I used …
-
It would be worthwhile writing an AVR HAL implementation for embedded-hal.
embedded-hal:
* [GitHub](https://github.com/japaric/embedded-hal)
* [Docs](https://docs.rs/embedded-hal/)
-
### Describe the Bug
I have been using a custom split keyboard with Elite-C v4 (ATMega32U4) microcontrollers that communicate over serial using a USB-C cable.
With the latest QMK Firmware, the key…
rpn32 updated
6 months ago
-
Using a brand new Pro Micro 5V board [from here](https://eckstein-shop.de/HIMALAYA-Basic-Pro-Micro-5V-16MHz-Arduino-Mini-Leonardo-Compatible-board), plugging it into the computer and following the ins…