-
Crear los archivos necesarios de PIO para
- Boards
- Platforms
- Devices
Así como agregar las configuraciones necesarias y los ejecutables correspondientes (compilador, linker, assembler, linker…
-
With the aim of compiling the AVR code on Mac OS, I called this script, https://github.com/noctarius/as2make/ , using
```
./as2make --output-name=labrafirm_new --toolchain=/usr/local/avr --toolchain…
-
I'm trying to use this library and hitting a problem. Below is the (verbose) output. I did notice that the StandardCplusplus.h include does an #undef abs, which I'm assuming is related to this, but in…
-
**SPOILER ALERT: It was a cold solder joint :)**
---------------------------------------------------------------
Hi Spence and others,
I've been using megaTinyCore for about a month now to de…
-
Some programmers, especially older Atmel ones, tend to have changed their USB PID during their lifespan.
The JTAGICE3 for instance, started out with PID 0x2110 but was later changed to 0x2140 when th…
-
### I want to add my board to Nuttx.
Added as in the official instructions.
When I enter `tools/configure.sh -L` then my board is displayed in the list.
But when I try to configure `tools/configur…
-
Just got a serial port AVR910 prog (based on AT902313 and use some passive components for the serial interface) from AliExpress (along with a serial port based SI-Prog).
Currently avr910 only supp…
-
Right now, using autotools is still the (IMHO) only way to build the documentation.
However, something is broken there, as the Makefile tries to build more than docs in the `docs/` subdir, and fails:…
-
Julien Aube
Mon 07 Nov 2011 08:49:21 AM UTC
Attached is a patch to let the AVR-Dragon program the avr32 parts.
The AVR-Dragon uses the same protocol than the jtagmkII probe, so the patch apply the …
-
main.hip
```
#include
#include
#include
#define CHECK_HIP(expr) \
do { …