-
_From @Roxy-3DPrintBoard on March 30, 2016 19:59_
The Atmel ATSAM3x8e on the Due board is definitely viable. It has the benefit it can plug into the RAMPS or RADDS base board and at that point it i…
-
Good afternoon. My name is Alexey, I'm from Russia, I don't speak English well, I'm sorry. I have an Atmega 8535 microcontroller. I made an arduino out of it. Photo below. I wanted to try mining DUINO…
Zlody updated
2 years ago
-
kyriako
Tue 16 Aug 2011 07:18:17 PM UTC
Hello avrdude,
I wanted to use avrdude for programming older AVR types, especially AT90S1200.
For testing the installation, I wrote a "blink test" program. Do…
-
[Serial TFT 2.4INCH with touch sreen Schematic.pdf](https://github.com/prenticedavid/MCUFRIEND_kbv/files/7027755/Serial.TFT.2.4INCH.with.touch.sreen.Schematic.pdf)
I recently purchased this PCB with …
-
During all of the below testing, unless otherwise noted, the movements that showed an issue were from X0 Y0 to X220 Y245, or back to X0 Y0, at F90000 (faster than the machine or firmware can go, but i…
-
Microchip/Atmel has been distributing "new device" support in the form of "packs", rather than an updated "toolchain" or "avr-libc"
This can result in errors of the form "/usr/avr/include/avr/io.h:62…
-
I am facing the next error:
```
Cannot run program "C:\Program Files (x86)\Arduino{build.toolchain}{build.command.g++}" (in directory "."): CreateProcess error=2, The system cannot find the file spe…
-
I would like to help to get the TLC5940 support started ... but I am confused as to how to. Is there anyone else who is working on this (tlc5940) support or another chip that I could see how adding a …
-
My computer system is ryzen 2400g and b350m-HDV, and I'm using Arduino Uno.Arduino IDE is 1.8.8 Windows store version.
I tried to upload new program and test it out, but it spit errors and failed.
I…
-
I've just released picoboot-lib, which I believe is the smallest and least intrusive bootloader for tiny AVRs.
https://github.com/nerdralph/picoboot-lib
It uses the last 256 bytes of flash + 2 bytes…