-
**Feature Request**
Is there a way to know if the device was power off and on again quickly?
When resetting a device we need to turn it on and off 3-5 times. This puts the chip in to a reset mode wi…
-
```
The OScope is a useful monitoring object and has artistic
applications as well. As of version 2.41, the OScope has
only a few of the controls found on 'real' oscilloscopes.
Although some additi…
-
LED coloring is not linear (0-255 input, but 20 appears to be over half brightness). This means all the colors just look like varying shades of white. Figure out how to overcome this (even if it just …
-
Enable the ability to adjust brightness in macOS. This is dependent on Graphics Acceleration being completed.
-
Following setup:
- Mac mini (2018)
- macOS 10.14.1
- Dell P2415Q
- HDMI 2.0 enabled
- Connected over HDMI
Setting the brightness/contrast appears to just do nothing 🙁
Output from a debu…
-
Hi all,
I know there is work going on making the red LEDs work but the intensity of the white and red LEDs is controlled by a light sensor in nickel. Without running nickel this brightness level is …
-
```zigbee:
id: "zb"
endpoints:
- num: 1
device_type: ON_OFF_LIGHT
clusters:
- id: ON_OFF
attributes:
- id: 0
type: bool
…
-
### Describe the bug
In the [documentation](https://search.nixos.org/options?channel=23.11&show=hardware.acpilight.enable&from=0&size=50&sort=relevance&type=packages&query=acpilight) of the `hardware…
-
Firstly.
THANKS a lot for this work. I spent more than 5 days with no avail trying to make Catalina run properly on this laptop until I found this repo!!!!
Congrats!!!
After installation, i had s…
-
The colour control for light bulbs used to work a few weeks ago, but no longer does. I traced what is reported by the API in `support_color()` and I see to following in `self.data`:
```
{
"brig…