-
Hello,
I have recently changed to DHTnew after this thread, and I noticed that completely at random, I get these very high values of humidity. Of course I could just ignore them if higher than 100…
-
Hi,
I have been testing this library with a DHT11 and a DHT22, since I could not make Adafruit's one work with DHT22 sensor (it stops working after 2h of usage).
Anyway, this library is working …
-
When adding a DHT11 temperature is reported in [tempname]-temperature AND in [tempname]
![image](https://user-images.githubusercontent.com/61065452/75491022-8398c000-59b5-11ea-93c7-5609c1e0ef47.png)
…
-
Boa tarde, estou com problemas com o ESP-01, eu estava usando esses códigos para enviar o ID do sensor e a temperatura para o MYSQL: https://blog.eletrogate.com/salvando-dados-do-arduino.../...
Até a…
-
Hi.
I was searching for some hacks on ikea desks and found an interesting article claiming that it is 1cm accurate.
This is the article:
https://www.henrirantanen.fi/2016/04/18/smartdesk-sensor-u…
-
The example on page 241 indicates a DHT22 device and (unless i've missed something) is powering it from pin 36 which is a 3.3v supply. According to DHT22 datasheets it requires 3.5v - 5.5v! [I've trie…
-
pi@raspberrypi4B:~ $ uname -a
Linux raspberrypi4B 5.10.83-v7l+ #1499 SMP Tue Dec 7 14:08:09 GMT 2021 armv7l GNU/Linux
pi@raspberrypi4B:~ $ libcamera-still --version
libcamera-apps build: 7617ec5c…
-
# 필수 사항 : 기본 구상, 흐름
# 흐름
## (1) 봉 길이 측정 시작
- 모터 전원 OFF & 로터리엔코더 내장 스위치 LOW
- 사용자가 기기를 직접 움직임(인간동력)
- 시계방향으로 움직인 최대 각도, 반시계방향으로 움직인 최대각도를 더하여(절댓값) 봉 길이 in 스텝수 측정
## (2) 모드 간 변환 : 앱 …
-
When I add the following for logging to file then the file is not written in 2.2.6. In 0.5.6 this was working correctly:
```
logging:
version: 1
formatters:
simple:
format: "%(as…
-
I am running **Ubuntu Server 20.04 LTS 64-bit** on a **Raspberry Pi 3 B**. I have a **DHT11** sensor module.
I am following the instructions from https://learn.adafruit.com/dht-humidity-sensing-on-…