-
**_Reported by jiequan wu:_**
Configuration
==========
x86
Bug detailed description
===================
dns_client ipv4 runs failed
==================
1. Connect Arduino to the LAN with ENC2…
-
Hi mitxela,
I'm looking for a TFTP bootloader for my Arduino Mega 2560 and yours looks very promising.
There's one issue though: I cannot connect the Interrupt PIN (INT) of the ENC28J60 to my mi…
-
**_Reported by jiequan wu:_**
Configuration
==========
x86
Bug detailed description
===================
Arduino_101 doesn't response ipv6 ping request affer enable echo_client ipv6
Patch
…
-
Hello to everyone.
Excellent lib, works fine on mega 2560 + ENC28J60.
But not on 'arduino due' or 'esp-12'. (btw on 'uno' it just does not work for scarce memory)
On these two boards I managed to get …
-
Using 0c2e083
Use this config and compile for Pollin netio:
[config_2017-10-31_1wire.txt](https://github.com/ethersex/ethersex/files/1431678/config_2017-10-31_1wire.txt)
flash it
Ping board by…
-
**_Reported by jiequan wu:_**
Test steps:
1. cd samples/net/echo_server
2. enable IPv6 and disable IPv4:
CONFIG_NET_IPV4=n …
-
I am trying to get the samples/net/dhcpv4_client/ working on hifive1 board, using the branch provided by @palmer-dabbelt .
I use the following for the prj_hifive1.conf file (copied from arduino 101…
-
**_Reported by jiequan wu:_**
Test steps:
1. cd samples/net/echo_server
2. enable IPv6 and disable IPv4:
CONFIG_NET_IPV4=n …
-
First checkbox marks a tests as run. Second (sub) checkbox indicates success, please add comment on failure.
- [x] **bitarithm_timings**
- [x] success?
- [x] **bloom_bytes**
- [x] success?
…
smlng updated
6 years ago
-
I pull the latest 6lbr and build it for CC2538DK+enc28j60. I can access to 6lbr web page but my CC2650 SensorTag cannot join 6lbr running on CC2538DK+enc28j60. I have see 6lbr uses channel 25 and pan …