-
Hello sorry for my English
I will try to explain you my problem
I write my account, mail and password but it's a bad configuration, no update is possible.
I have an Ariya of December 23 in Fran…
-
Dear Valentin Roland
I am an engineer from Good Display, and I admire this project very much, so I copied pcb, I think you know this company, now I want to mass produce the pcb I copied, and sell i…
-
Any chance there is a way to get it to work with this,
7.3inch ACeP 7-Color E-Paper E-Ink Display Module, 800×480 Pixels, SPI Communication
https://www.waveshare.com/product/displays/e-paper/epaper-…
-
Hello guys,
Are we able to use GUI software like Squareline Studio (or other software) to create the layout and use this driver together?
Thanks,
-
Add a LVGL driver for the touch that comes with [Lilygo parallel epaper EPD47](https://github.com/martinberlin/cale-idf/wiki/Model-parallel-ED047TC1.h)
* Size: **960 * 540**
* Epaper model: ED047…
-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
circuit board
### Power Stabilization
Elko (~100uF)
### Connec…
-
It's very nice example for ESP32-C3.
Please, could you provide also the example for other most common ESP32 chips like plain old ESP32 and ESP32-S3 which are popular in some ePaper based boards?
-
Hello,
got my Inkplate 10 today, seting all up but it doesn't show any picture.
still have the "welcome to ihnkplate" screen.
The Logs said:
```
21:23:56.558 > [IMAGE] Downloading image: http…
-
Hi ,I make some new V7 board,But there are some problems I can't understand,I use the board to display ES108FC1,When I don't plug in the screen,Serial port logs are normal,The voltage at the test poin…
-
Hi!
I have the 7.8inch e-Paper HAT.
The display is connected to a Raspberry Pi 3B+ with freshly installed RaspbianOS.
The demo from the Waveshare homepage works and runs through without any problem…