-
**Describe the problem you have/What new integration you would like**
The "Update All" button in ESPHome is a nifty way of quickly updating all devices to the most recent version by creating a …
-
### The problem
Network sockets (at least UDP) does not work anymore on esp8266 platform, but works perfectly on esp32 arduino and libretiny, it may be linked to the introduction of IPv6 recently.
…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Installed via pip in virtual env with Python: 3.9.2
esphome 1.16.2
platformio 5.0.4
**ESP (ESP32/ESP8266, Board/Sonoff):**…
-
### The problem
In previous versions was possible to save custom board configuration into /config/esphome/.esphome/build/[your-esphome-device]/boards directory. This location does not exist anymore. …
-
after several days of normal operation the entities in HA becomes unavailable.
Home Assistant 2023.10.5
ESPHome 2023.11.2
WiFi ok. module is online
Reinstalled - no results
Delete device fro…
-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
* Home Assistant Version (2024.43):
* Ember Mug Component Version firmware 352, hardware 10)
* Which device(s) are you using for Bluetooth ( ESPHome Proxy):
### Description
The integration is …
-
At this moment two possibilities for room temperature readings are possible: internal temperature and an external wired sensor.
I would like to use a temperature reading connected wireless to HA as t…
-
As relative humidity is already a good measure about moisture effect, absolute humidity (in g/m³) is sometimes much more important, since it does not change with temperature increase and decrease. In …
-
Home Assistant version: 2024.8.2
OS: x86-64 - HP Laptop
OS version: 13.1
SmartIR version: 1.18.0
SmartIR configuration:
on esphome IR reciver/transmitter - tried 2 different transmitters Esp-…