-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.4 on 2024-09-17; Adafruit Feather ESP32S3 4MB Flash 2MB PSRAM with ESP32S3
```
### Code/REPL
```python
# full context: http…
-
### Suggestion
Enable a feature that blocks/limits peers with abnormal wasted data tired to their IP.
Maybe you'll tolerate 10mb (or a specified amount) from a single peer. So all peers who meet t…
-
Hi ATC1441,
I've been working hard on BLE in Tasmota ESP32, and had an idea about getting the keys for the sensors...
From reading your web source, you can obtain the key without reference to the MI…
-
# 🐛 Bug
## Command
## To Reproduce
Steps to reproduce the behavior:
1. I initialize a UNetModel in stablediffusion, simulate an input to get the output of the Unet model.
2. Then I in…
-
When flashing a BK7231N from Tuya Universal IR remote (model S06 from aliexpress, PCB is named "CB3S") I get a CRC error at the end of the flashing process. The firmware does not seem to start after r…
-
In the file oled.c, where the clock divide ration and oscillator frequency are initialized with the 0xD5 command. The parameter
in the file is "80", but I think it should be the hex value "0x80". T…
-
Refer https://community.platformio.org/t/debugger-not-starting/18338.
When attempting to debug the `nrf52_dk` board from the platform-nordicnrf52, after using "PIO Debug" in VSCode, the time until …
-
I've started a rough draft of what I think the new getting started page for ev3dev-stretch should look like based on feedback we've received over the years.
https://github.com/ev3dev/ev3dev/blob/ev…
dlech updated
7 years ago
-
Released as of 1.0.342
- [x] Basic comms
- [x] platform ID
- [x] Config dump
Left on Todo:
- [ ] Config edit
- [ ] Config presets for machines
- [ ] xModem upload of config files
- [ ] Conf…
-
Using the ESPHome normal installation with the good, HA entities are appearing, Assist Pipeline is configured, but no response whether holding down the left button to speak or using the wake word.
…