-
**Describe the bug**
When using Loom you can't use the LoRa m0 and ethernet featherwing at the same time. Ethernet initialization fails whether or not LoRa capabilities are enabled.
**Hardware in …
-
HI
I'm trying Arduino Zero
SAMD21 CPU
```
=== Test of FTP Server ===
Mount the SD card with library FatFs ... ok
Initialize ethernet module ... W5500 ok
IP address of server: 192.168.1.70
…
-
i used the this lib #include and used the simple example i managed to get an green led on pin 6.
when i switch to this lib#include
i start the strand example. on pin 5 - Serial.println(strip.…
-
https://forums.adafruit.com/viewtopic.php?f=60&t=132231
[mod edit - removed key word highlighting from url]
-
heya im using known good hardware, with pullups on the SD CS line, no level shifters, PCB traces not jumpers - but getting 'flakiness' on init/mount
```
[E][sd_diskio.cpp:99] sdSelectCard(): timeo…
-
**Describe the bug**
Using the Hypnos board to power the i2c MUX down and back up in between sleep cycles, MUX does not retain initialization. This should be handled as part of a larger issue with po…
-
Hi Jomelo,
I've used your lib now for different projects and the most are running on SAMD21 boards like Adafruit's Feather M0. Yesterday I tried the new Feather M4 Express with the SAMD51 and it a…
-
**Describe your question or issue**
A timing issue is causing EV_TXCOMPLETE only to get issued if I add a few debug print statements.
I am using the LMIC library with abp. I can consistently reprodu…
-
hi,
please i need to compile mote z1 under riot but when i launch BOARD z1=make it display error arch32, i try to upgrade msp430-gcc-4.6.3 to 4.7.3 but it's failed..please i need help
best regards
-
Hello,
The Schematic drawing does not seems to be right compared with the description text.
- Transistor go to channel A1 on the Feather.
- PIR sensor output go to A0.
Some bacic question…