-
Hello,
I'm running a y-splitter in my bowden tube to my hotend and had been using the shared heater option in the printer settings, which in the new 4.7 looks to be removed. This needs to be added…
-
**Description**
Devices are not cached and they are marked as stale and then re-added to homekit as new, thus causing them to lose their HomeKit configuration/associations. This happens whenever you …
-
**Describe the bug**
Database Export not working.
**Steps to reproduce**
1. Click on Export
2. Nothing happend expect eexport.html
**Expected behavior**
A database export?!?!
**Did the …
-
#### What were you doing?
I had a crash while printing which caused a layer shift and the prusa recovered, came back to the position and then just stopped.
in looking at the log it appears that…
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…
-
Hi.
I performed the steps, I have Octopi Version 0.17.0, running on Raspberry Pi 4 Model B Rev 1.2, and Octoprint Version 1.4.2.
I ran into the following issue, where no plugins were installed. So …
-
Plugin v1.5.0
OctoPrint v1.4.1
Python v3.8.3
gcode: [Treefrog_0.2mm_FLEX_MK3S_1h5m.gcode](https://github.com/OllisGit/OctoPrint-PrintJobHistory/files/4931454/Treefrog_0.2mm_FLEX_MK3S_1h5m.gcode.t…
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.3.4
#### Version of OctoPrint
OctoPrint …
-
**Hardware Setup**
Board type "Creality V2.1" and printer model "CR10" updated (S). | OctoPrint 1.4.0 running on OctoPi 0.17.0
**Describe the problem**
Flashing failed Avrdude returned code 1
…
-
**Describe the bug:**\
I am using multiple computers. One besides the printer, one in my office upstairs.
Usually, on the computer near the printer, I leave the mainsail browser tab open and walk aw…