-
I've been happily using homebridge-rasppi-gpio-garagedoor for a few years now, to monitor and control my two garage doors. Thanks for the really useful plug-in.
Unfortunately it looks like the late…
ozjc updated
5 months ago
-
Hi
I'm trying to adapt the build for my TS0201, this version is identified as _TZ3000_bguser20.
![PXL_20240926_083742724](https://github.com/user-attachments/assets/a7d8f5fe-ad0a-493a-b3ef-3770…
-
It would be great for there to be a feature where if there is a pusle on a GPIO pin, the PSU is turned on.
I've got a momentary push button and it would be better to be able to press it and have th…
-
I have a project that requires the control of several relays. One of them can logically be assigned to the "spindle on/off" control, but the others don't really map to standard gcode operations. I'd…
-
Hi all, I think I know what the problem is but can't seem to find a way to fix it.
I don't think I have permissions and I don't think I run Homebridge as root. When I try to the accessories don't s…
-
- [x] I have read the [README.md](https://github.com/flyte/pi-mqtt-gpio/blob/develop/README.md) file and visited the [Documentation](https://mqtt-io.app/) to see if the information there helps.
**D…
-
**Describe the bug**
After initializing a GpioButton, the IsPressed property is always false, even if the logical state (depending on active low/high configuration) of the pin is true.
**Steps t…
-
### Board
ESP32-S3-WROOM-1U
### Device Description
The pins are connected via board jumpers.
### Hardware Configuration
#define PIN_LCD_TE 11
#define PIN_LCD_CS …
-
Two device tree overlays cannot specify chip-select pins on a single SPI device.
For example, if a board revision introduces a device on an SPI bus, and then a shield also introduces a device on th…
-
Based on a test of installation, the error of installation stops at wheel with install.sh. Your support is appreciated
```pi@nakedcake:~/project_aroundtheclock $ sudo ./bin/install.sh
>>> INST…