-
Phone Model: Xiaomi Mi 4c LOS 14.1
---------------
FreeDcam Version: 4.1beta6
I'm really glad someone took over this project and for the first time almost all options work on my current phone…
-
Hello,
I'm trying to get your driver to work on a RPi running Arch Linux ARM. The driver compiles and loads fine, but I get no /dev/video*. lsusb seems to only show the motor connected:
```
$ lsusb
…
ghost updated
6 years ago
-
> sudo uhubctl
Current status for hub 1-1, vendor 0424:9514, 5 ports
Port 1: 0503 highspeed power enable connect [0424:ec00]
Port 2: 0100 power
Port 3: 0303 lowspeed power enable connect…
-
My solution:
- number 1
- 2 adders
- a latcher
Result:
- Time: 12 mTicks
- Modules: 5
Goal:
- Time: 18 mTicks
- Modules: 3
-
On RaspberryPi 2B the memory detected and reported by VC (through ATAGS as well as through mbox interface) is wrong when device boots over network. VC Says the ARM memory starts at 0x00000000 and has …
-
(moved here from tail comments of #825)
When we do a full PXE boot (bootcode.bin on SD card), if there's a USB storage device of any kind, the boot process halts. (Green light blinks 3? times, repe…
-
*jmomo:*
I am seeing a strange problem on my new TRENDnet tew827dru, which is ipq8064 based. It has two USB3 ports.
I have noticed a problem with USB3 flash drives. If I boot the system with a USB…
-
I don't know if the reference is stable on the long term
But I tested this on https://www.amazon.fr/dp/B00E4J7PTM/ Amazon Basics USB 3.0 7 ports hub, and power on/off works fine.
It appears as two…
-
Hello, I was trying your image and I have some issues with it.
following the guide from BPI of installing WiringPi & python GPIO and it doesnt run on the board.
the error I get that the applicatio…
-
*ryu4184152419:*
USB 3.0 case with jms567 chip
I am putting HDD.
It worked with LEDE 17.01.4,
It does not work with OpenWrt 18.06 rc-1
kmod-usb-storage, kmod-fs-ext4, block-mount kmod-usb-sto…