-
Could the definitions for the [Lora Vision Shield](https://store.arduino.cc/usa/portenta-vision-shield-lora) that connects to the [Arduino Portenta](https://store.arduino.cc/usa/portenta-h7) be added …
-
BME680 sensor and OLED display both use i2c communication from separate parallel tasks.
Since esp32 i2c hal is not thread safe, we need a mutex solution for this, otherwise the i2c bus driver crashes…
-
Hello Jan,
I was wondering do I just need to include the janpatch.h in my mbed-os 5 application and then figure a way to use your block device example? In most of your example projects that use jan…
-
NOTE: This is a question rather than an issue. I [posted it on the forum](https://forum.arduino.cc/index.php?topic=634356.0), but got no replies, so I'm re-posting here! ;)
---
I am playing with…
-
Hi Alex,
I am in process of designing new PCB for home automation using Raspberry Pi Zero.I need your help in identifying proper pins for following hardware:
- I2C Bus for temperature, humidity,…
-
Would it be fairly simple to locate or provide the implementation for lmic_aes_**decrypt**, either in the form of the "ORIGINAL_AES" or "IDEETRON_AES"?
I could not find a source for this online. I…
-
**Summary:**
The buzzer seems to only work in certain circumstances. The basic app seems to work fine, with the buzzer playing at the end. However, when integrating it into another application, …
-
Hi Pycom team,
I can successfully build v1.20.2.r4 from source, but got runtime error.
* Pygate + Gpy
* v1.20.2.r4
I build the r4 from source by:
```bash
make BOARD=GPY BTYPE=release VARIA…
-
**Describe your question or issue**
Compared to other end-devices LMIC appears to just increment channels after each uplink, not pseudo random channels selection as shown in LoraWan 1.0.3 line 244
…
-
Hello everyone!
The problem is in mbed support in PIO. If I enable RTOS support via recommended macro then PIO recompiles everything that is in MBED framework (all features, all drives and everythi…