-
I tried to set #define TEMP_SENSOR_0 to 147 or 110, but nothing changed
the hotend temp is always 300 when the printer is turned on.
(the good thing is I know the temp controlled fan is working, wh…
ghost updated
3 years ago
-
Switched out the extruder stepper for my Tevo Nereus with a Makerbase MKS Nano 1.1 mainboard using marlin bugfix 2.0. The original stepper has one gear that drives another gear to moves the filament. …
-
PLEASE upgrade marlin to the latest version as your "https://github.com/makerbase-mks/MKS-SGEN_L-V2/wiki/Marlin_firmware/README" suggestion.
The marlin example config version is `020008`, and there…
-
is there any way to get an info / status display fpr the TFT35.
i would like to see the bed an hotend temp at the same time.
for the TFT32 there is an retro firmware but not for the TFT35
-
Board: MKS robin nano v.2
Last marlin 2.x bugfix
After activating CUSTOM_USER_MENUS in configuration_adv in the "Tools" menu, the item "more" should appear.
In fact, nothing appears. Three weeks …
-
I tried the code with e3+2209+3dtouch and compiled successfully. The issue is that it forget the x and y spaces when starting to print.
I also tried the compiled bin file from this repository with e…
-
If the name of the transferred file contains Chinese, it may result in the failure to start printing. It is recommended that you can prompt to rename before transferring
如果傳送文件名稱包含中文,則可能導致無法開始打印,建議傳送…
-
I see the options for bed leveling in the config file here...
#leveling mode(manual:0; auto:1; conceal leveling button:2)
>cfg_leveling_mode:0
but it only shows manual auto and conceal. I don't…
-
I tried to build the source code with IAR 7.5 (and 8.5 too)
And I used 16GB SD card with FAT32. (also tried 32GB SD)
But the screen freezes at "Updating 100%", and it also freezes at "Booting.." aft…
-
The LCD shows booting when first powering on then goes blank. I have been able to get the older marlin screen to work but not the GUI screen firmware.