-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
Hi,
When I try to read a value of a modbus TCP/IP device directly connected to it with a ethernet cable with the following code i receive the values correctly:
```
// create an empty modbus cli…
-
Sorry having couple issues again. Getting the following errors. I have the 4 THC-S wires hooked up as follows: black on gnd, brown on 12v, yellow on A and blue on B. I have 2 RS485 modules and THC sen…
-
I could not get the modbus slave to respond to read requests, after I modified the cpp file, it works.
I was requesting read of 35 holding registers from address 256 like so;
result=node.readHoldi…
t6Jay updated
4 years ago
-
Hello there,
We try to utilize the code for our project but we realize that it is not possible to listen to a modbus device of a specific SlaveID using tcp connections. It seems that it may be avai…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…