-
I tried different eproms, different 8.16kb files and just the menu and it never worked. I tried to put the eprom into another cartridge and the menu appears there at least. So does it work for anyone?
-
Hi, I'm getting strange behavior on my nozzle fan.
M106 - Set Fan Speed command only works BEFORE print but doesn't do anything while printing or after the print.
so if I turn printer on, then iss…
-
I'd like to make a for-real PCB for this circuit—ideally with the circuits mounted underneath so everything fits within the footprint of a Pi Zero and is only the height of the GPIO header plus a PCB.…
-
http://www.hizook.com/blog/2010/03/14/robotis-dynamixel-servos-overview-applications-tear-down-and-open-source-software
-
# Overview
* A cartridge holding a 5V NOR flash (like Microchip SST39Fxxx series (SST39F010, SST39F020, and SST39F040 for 128kB, 256kB and 512kB) to be plugged into the cartridge port of a Thomson …
-
Hello everybody!
After quite a while of searching for the "perfect" CNC controller board, I decided that Grbl on ARM is the way to go, but I didn't fall in love with a specific hardware. I have rea…
-
please see above
this is also being carried through into home assistant too.
-
I've found my RATGDO in an unresponsive state multiple times and am having a hard time figuring out what the issue is. I have 2 ESP32 devices in my garage and the RATGDO is closest to a Unifi AP with …
-
I am trying to set up a unified lighting display with my keyboard and RGB LED strands, and a program like this would be cool. It could be printing device RGB data to the Arduino or other receiving dev…
-
> @PeaPodTech/mechanical
**Completion is tracked in the linked issue.**
## Design Scope
Design a high-pressure aeroponics system for delivering pH- and temperature-controlled nutrient-rich w…