-
I'm testing, testing, testing... with the example mqtt_basic to see the behavior with a bad wifi connection.
My goal is to get the MQTT connection always to be restored after a Wifi drop. My ESP shoul…
BJvDL updated
9 years ago
-
This happens on a loop after I try to connect a second signer while a first signer does keysends with the broker.
This might be hard to reproduce, might be a one-off - not quite sure what happened.…
-
I'm struggling with this project regarding the configuration web page
When I enter the Config and press save I have an error on the serial monitor
Does this happen to you?
Which version of arduino ide…
-
Hello,
I took pretty much this [example code](https://github.com/martin-ger/uMQTTBroker/blob/master/examples/uMQTTBrokerSampleOOFull/uMQTTBrokerSampleOOFull.ino) to set up a MQTT broker on an [ESP8…
-
Hi all,
I think this topic is not really an issue with that software, but I would like to know if some of you have the same issue?
From time to time the communication breaks down and does not rees…
-
Hello,
I am trying to publish sensor data to MQTT using SIM800l , I have used [https://github.com/vshymanskyy/TinyGSM](url) library to connect with cloudmqtt.this library use pubsubclient for MQTT c…
-
Hi
I use SSL to connect to a broker.
When I publish a QoS1 or QoS2 message, there is a high probability that the MQTT connection will be disconnected.
When I print the lastError, it shows LWMQTT_…
-
### Please Provide the following information:
- ESP8266MQTTMesh version: 1.0.4
- AsyncMQTTClient version: 0.8.2
- ESPAsyncTCP version: 1.2.0
- ESP8266 Core version: 1.0
- Using the [Hello World E…
-
I'm using ESP32 with Platformio in Arduino code. I am sending information with a SIM800 through MQTT using Pubsubclient and TinyGSM to a .net broker using FreeRTOS. ESP32 starts and all works fine, I …
-
**Component**
* Rule Engine
**Description**
I want to use _'External - mqtt'_ Node in rules engine of Thingsboard Edge to send data as an AWS Thing to IoT Core/Greengrass.
I have uploaded …