-
As described earlier, I have the problem that I cannot change settings with Nuki Opener if I change the settings.
Nuki hub always restarts if I change settings by sending commands by mqtt (uptime res…
-
Hallo Andreas, ist für Home Assistant auch eine MQTT-Auto-Discovery geplant und eine Visualisierung für ein OLED SSD1306 Display? Das wurde für die HM/HMS ohne W ja schon sehr gut umgese…
ohAnd updated
3 months ago
-
Any ideas what's going on here?
![disconnect](https://user-images.githubusercontent.com/159567/72214338-ee9c4d80-3553-11ea-90a4-d86af267f870.gif)
This is connected to a mosquitto 1.5.7 server,…
ghost updated
4 months ago
-
### The problem
Using zwave-js ui. Added Fibaro roller shutter 4. Can controll the cover with zwave-js ui.
But in Home Assistant the controllers are not created.
![image](https://github.com/home…
-
I have a bunch of Honeywell 5800 series security contacts that decode reliably, but I have two 5816 door sensors that don't decode reliably. If the sensor within 15 ft of the rtl-sdr it doesn't decod…
-
I experienced serious issue with integration with HA on version 3.0.
I'm running default HA configuration. Tried to change heat mode and target temp. The problem is fast switching (once per second) o…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
If i add an googlechart in the scripting language with $gc(lt eMonth elaMonth "wr" "Aktuell" "Letzter" "cnt0" "T…
-
No data being published in mqtt. Working until June 16th around 11PM CET
API registration is "successful operations"
-
MqttCoreServiceのstart時とwebhookの受信時に正しく反映されないのですが、仕様上仕方がないものでしょうか?
添付画像1はCeiling Light Proで最後のbrightnessが59の状態でOFFにした状態から、下記の1,2を実行したものです。
1.純正リモコンのON/OFFボタンを押してONにした。
2.純正リモコンの「明るい」ボタンを押して明るくした(内…
-
Hi!
After encountering significant problems with the MQTT trigger node, I decided to write this up, hoping it could help identify the origin of the issue.
**Describe the bug**
The MQTT trigger …